1) Build control: Speaker inside enclosure composed of enough sound absorption material to prevent sound escape………..
1) Create control: 1 ft. away from control enclosure
2) Start tone generation of X frequency
3) Test leads of Manley Voxbox (voltage) and record data
4) Change tone generation to frequency X
5) Record voltage from Manley……
6) Change to frequency X
7) Record voltage
8) Switch to distance #2
9) Repeat steps 2-7 for distance Y
10) After controls have been recorded, place 1 inch of polyurethane in front of control enclosure, and repeat steps 2-9
11) Then place 2 inches in front……. Repeat 2-9
Introduction
| Information | Procedure
| Data | Conclusion
| Links | Return to
Research 2001
© Don't even think about copying