Accessing Beowulf Cluster Terminal..._

 

 

butch login: guest
password= ********
.
.
.
.
.
.
.
.

********** TUALATIN HIGH SCHOOL: BUTCH BEOWULF CLUSTER**********

 

 

Loading kernel...

 

klogd 1.3-3#33.1, log source = /proc/kmsg started.
Inspecting /boot/System.map-2.2.18pre21
Loaded 9721 symbols from /boot/System.map-2.2.18pre21.
Symbols match kernel version 2.2.18.
No module symbols loaded.
Linux version 2.2.18pre21 (root@butch) (gcc version 2.95.3 20010111 (prerelease)) #2 SMP Wed Jan 17 19:33:41 PST 2001
mapped APIC to ffffe000 (00261000)
Detected 265913 kHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 530.84 BogoMIPS
Memory: 63064k/65536k available (1072k kernel code, 420k reserved, 912k data, 68k init)
Dentry hash table entries: 8192 (order 4, 64k)
Buffer cache hash table entries: 65536 (order 6, 256k)
Page cache hash table entries: 16384 (order 4, 64k)
512K L2 cache (4 way)
CPU: L2 Cache: 512K
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
512K L2 cache (4 way)
CPU: L2 Cache: 512K
per-CPU timeslice cutoff: 100.07 usecs.
CPU0: Intel Pentium II (Klamath) stepping 03
SMP motherboard not detected. Using dummy APIC emulation.
PCI: PCI BIOS revision 2.10 entry at 0xfd931
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: 00:00 [8086/1237]: Passive release enable (00)
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
TCP: Hash tables configured (ehash 65536 bhash 65536)
Initializing RT netlink socket
Starting kswapd v 1.5
Detected PS/2 Mouse Port.
Serial driver version 4.27 with no serial options enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
pty: 256 Unix98 ptys configured
Real Time Clock Driver v1.09
PIIX3: IDE controller on PCI bus 00 dev 39
PIIX3: not 100%% native mode: will probe irqs later
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio
hda: QUANTUM FIREBALL CX6.4A, ATA DISK drive
hdc: CD-ROM CDU611-F, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: QUANTUM FIREBALL CX6.4A, 6149MB w/418kB Cache, CHS=784/255/63, (U)DMA
hdc: ATAPI 10X CD-ROM drive, 256kB Cache
Uniform CD-ROM driver Revision: 3.11
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
scsi : 0 hosts.
scsi : detected total.
PCI latency timer (CFLT) is unreasonably low at 24. Setting to 32 clocks.
eepro100.c:v1.09j-t 9/29/99 Donald Becker http://cesdis.gsfc.nasa.gov/linux/drivers/eepro100.html
eepro100.c: $Revision: 1.20.2.10 $ 2000/05/31 Modified by Andrey V. Savochkin <saw@saw.sw.com.sg> and others
eth0: Intel PCI EtherExpress Pro100 82557, 00:A0:C9:0D:A8:F3, I/O at 0xff80, IRQ 11.
Board assembly 352509-003, Physical connectors present: RJ45
Primary interface chip DP83840 PHY #1.
DP83840 specific setup, setting register 23 to 8462.
General self-test: passed.
Serial sub-system self-test: passed.
Internal registers self-test: passed.
ROM checksum self-test: passed (0x49caa8d6).
Receiver lock-up workaround activated.
PCI latency timer (CFLT) is unreasonably low at 24. Setting to 32 clocks.
eth1: Intel PCI EtherExpress Pro100 82557, 00:A0:C9:1F:3C:F6, I/O at 0xff40, IRQ 10.
Board assembly 352509-003, Physical connectors present: RJ45
Primary interface chip DP83840 PHY #1.
DP83840 specific setup, setting register 23 to 8462.
General self-test: passed.
Serial sub-system self-test: passed.
Internal registers self-test: passed.
ROM checksum self-test: passed (0x49caa8d6).
Receiver lock-up workaround activated.
eepro100.c:v1.09j-t 9/29/99 Donald Becker http://cesdis.gsfc.nasa.gov/linux/drivers/eepro100.html
eepro100.c: $Revision: 1.20.2.10 $ 2000/05/31 Modified by Andrey V. Savochkin <saw@saw.sw.com.sg> and others
Partition check:
hda: hda1 < hda5 > hda2
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 68k freed
Adding Swap: 128484k swap-space (priority -1)
VFS: Disk change detected on device fd(2,0)
VFS: Disk change detected on device fd(2,0)
Kernel logging (proc) stopped.
Kernel log daemon terminating.
klogd 1.3-3#33.1, log source = /proc/kmsg started.
Inspecting /boot/System.map-2.2.18pre21
Loaded 9721 symbols from /boot/System.map-2.2.18pre21.
Symbols match kernel version 2.2.18.
No module symbols loaded.
Linux version 2.2.18pre21 (root@butch) (gcc version 2.95.3 20010125 (prerelease)) #3 SMP Tue May 29 12:28:00 PDT 2001
mapped APIC to ffffe000 (00273000)
Detected 265914 kHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 530.84 BogoMIPS
Memory: 62992k/65536k available (1132k kernel code, 424k reserved, 920k data, 68k init)
Dentry hash table entries: 8192 (order 4, 64k)
Buffer cache hash table entries: 65536 (order 6, 256k)
Page cache hash table entries: 16384 (order 4, 64k)
512K L2 cache (4 way)
CPU: L2 Cache: 512K
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
512K L2 cache (4 way)
CPU: L2 Cache: 512K
per-CPU timeslice cutoff: 100.07 usecs.
CPU0: Intel Pentium II (Klamath) stepping 03
SMP motherboard not detected. Using dummy APIC emulation.
PCI: PCI BIOS revision 2.10 entry at 0xfd931
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: 00:00 [8086/1237]: Passive release enable (00)
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
TCP: Hash tables configured (ehash 65536 bhash 65536)
Initializing RT netlink socket
Starting kswapd v 1.5
Detected PS/2 Mouse Port.
Serial driver version 4.27 with no serial options enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
pty: 256 Unix98 ptys configured
Real Time Clock Driver v1.09
PIIX3: IDE controller on PCI bus 00 dev 39
PIIX3: not 100%% native mode: will probe irqs later
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio
hda: QUANTUM FIREBALL CX6.4A, ATA DISK drive
hdc: CD-ROM CDU611-F, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: QUANTUM FIREBALL CX6.4A, 6149MB w/418kB Cache, CHS=784/255/63, (U)DMA
hdc: ATAPI 10X CD-ROM drive, 256kB Cache
Uniform CD-ROM driver Revision: 3.11
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
scsi : 0 hosts.
scsi : detected total.
PCI latency timer (CFLT) is unreasonably low at 24. Setting to 32 clocks.
eepro100.c:v1.09j-t 9/29/99 Donald Becker http://cesdis.gsfc.nasa.gov/linux/drivers/eepro100.html
eepro100.c: $Revision: 1.20.2.10 $ 2000/05/31 Modified by Andrey V. Savochkin <saw@saw.sw.com.sg> and others
eth0: Intel PCI EtherExpress Pro100 82557, 00:A0:C9:0D:A8:F3, I/O at 0xff80, IRQ 11.
Board assembly 352509-003, Physical connectors present: RJ45
Primary interface chip DP83840 PHY #1.
DP83840 specific setup, setting register 23 to 8462.
General self-test: passed.
Serial sub-system self-test: passed.
Internal registers self-test: passed.
ROM checksum self-test: passed (0x49caa8d6).
Receiver lock-up workaround activated.
PCI latency timer (CFLT) is unreasonably low at 24. Setting to 32 clocks.
eth1: Intel PCI EtherExpress Pro100 82557, 00:A0:C9:1F:3C:F6, I/O at 0xff40, IRQ 10.
Board assembly 352509-003, Physical connectors present: RJ45
Primary interface chip DP83840 PHY #1.
DP83840 specific setup, setting register 23 to 8462.
General self-test: passed.
Serial sub-system self-test: passed.
Internal registers self-test: passed.
ROM checksum self-test: passed (0x49caa8d6).
Receiver lock-up workaround activated.
eepro100.c:v1.09j-t 9/29/99 Donald Becker http://cesdis.gsfc.nasa.gov/linux/drivers/eepro100.html
eepro100.c: $Revision: 1.20.2.10 $ 2000/05/31 Modified by Andrey V. Savochkin <saw@saw.sw.com.sg> and others
Partition check:
hda: hda1 < hda5 > hda2
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 68k freed
Adding Swap: 128484k swap-space (priority -1)
VFS: Disk change detected on device fd(2,0)
end_request: I/O error, dev 02:00 (floppy), sector 0
VFS: Disk change detected on device fd(2,0)

 

Kernel loaded, activating session...

 

guest@helios:~$ startx

 

Initializing User Interface.

Starting X-windows...Please wait..._